Fire retardant, recyclable, flexible, light weight and filled nylons.
Under the partnership with ALM, RPS can supply a comprehensive range of high performance laser sintering powders for a wide range of processing applications. Special blends of laser sintering powders are available on request.
Please contact us for further information.
Explore our laser sintering materials below
Unfilled Nylon 12
PA 650-B
With increased recyclability over other comparable unfilled nylon 12 materials, PA650-B produces parts with excellent detail and a clean black surface.
PA 650
A biocompatiable unfilled nylon 12, this easy to process material can run as a drop-in replacement for other comparable unfilled nylon 12 sintering powders, providing improved part detail and surface finish.
PA 250
A nylon 12 powder for parts with excellent definition and surface finish. Stabilised against thermal degradation for low scrap volumes.
Filled Nylon 12
PA 614-GS
Engineered to be a drop-in replacement to other commercially available 40% glass filled materials.
PA 616-GS
A light grey, 50% glass filled, nylon 12 with a tightly controlled particle size, producing parts with a higher-detailed surface finish.
PA 640-GSL
A newly developed, glass sphere filled nylon12 with superior weight to strength properties for lightweight applications requiring strength and aesthetics.
PA 605-A
A 50% aluminium filled nylon 12 with excellent strength and surface feature detail, good dimensional stability and heat transfer characteristics.
PA 620-MF
A white, mineral-filled nylon 12 material providing anisotropic mechanical properties, with high stiffness for load bearing applications.
PA 618-GSB Black
Black 50% glass-filled nylon 12. Parts exhibit excellent stiffness and mechanical properties.
PA 615-GSB
A 50% glass-filled, black nylon 12 with tightly controlled particle size for higher-detailed surface finish, ideal for automotive engine components.
PA 617-GS
A black, 50% glass-filled, nylon 12, ideal for the production of accurate and detailed automotive components.
PA 602-CF
A dark grey carbon fibre filled nylon 12 material ideal for applications requiring stiffness and sustainable accuracy at elevated temperatures.
PA 603-CF
Nylon 12 high loaded with carbon fibre, offering low density, good dimensional stability, very high tensile modulus optimised for wind tunnel applications.
Unfilled Nylon 11
PA D80
An economical nylon 11 material providing parts that can withstand intense functional testing, suitable for production applications.
PA 850 Black
Produces parts with a true matt black surface finish, offering excellent fine detail resolution for thin walled parts and text.
PA 860 Natural
A white nylon 11 formulated for easy processing, producing parts with outstanding mechanical properties, without the need to double scan.
PA D80-ST
A colour stabilised nylon 11 material also stabilised against thermal degradation. Parts produced exhibit superior mechanical properties.
Filled Nylon 11
PA 803-CF
Emulates the mechanical properties of carbon fibre. Benefits include good dimensional stability, high tensile modulus, and a high heat deflection temperature.
PA 815-GS
An off-white, 50% glass sphere filled nylon 11 powder, a functional replacement for glass-filled nylon 12.
PA 820-MF
A mineral fibre-filled nylon 11 combining high strength with stiffness and a high deflection temperature.
PA 802-CF
Emulates the mechanical properties of carbon fibre. Benefits include good dimensional stability, high tensile modulus, and a high heat deflection temperature.
HP 11-30
Melt compounded carbon fibre-filled PA 11. Melt compounding allows the carbon fibres to orientate in the X, Y and Z direction, so the properties are basically the same in all directions. Well suited to applications which require superior thermal properties, with maximum performance and consistent properties in X,Y and Z dimensions.
PA 840-GSL
A lightweight composite material with a density of 0.86 – the parts will literally float on water.
PA 815-GSB
This Black, 50% glass filled nylon 11 produces parts that exhibit excellent stiffness and mechanical properties great for mold and tooling applications or automotive engine components.
PA 830-ESD12
An electrostatically dissipative Nylon 11 without carbon fibre, the material is based on a PA11 with conductive graphite and produces parts with high stiffness, high tensile strength and excellent surface finish.
Nylon 6 High Temperature
PA 703-CF
A carbon fibre-filled nylon 6 material with excellent mechanical properties and a higher temperature tolerance compared to standard nylon 12 materials.
Fire Retardant
PA 606-FR
A fire retardant nylon 12 that meets 12 and 60 second burn, smoke and toxicity specifications.
Fire Retardant Performance
PA 106-FR
A nylon 11 material approved to FAR 25.853 for parts that exhibit superior mechanical properties with high levels of fire retardancy.
PA 109-FR
A paintable grade fire retardant nylon 11, certified to pass the FAR 25.853 60-second vertical burn requirement.
High Temperature
HT-23
Well suited to applications which require superior thermal properties, with maximum performance and consistent properties in X,Y and Z dimensions.
Thermoplastic
TPE 210-S
A thermoplastic elastomer for rubber-like parts that exhibit good feature definition. Infiltration with a PU will impart toughness and abrasion resistance.
TPE 360
Ideal for applications requiring softer parts with excellent ductility and surface finish.
TPE 300
100% recyclable, produce soft, white parts and achieve extreme elongations without permanent deformation. Easy to infiltrate to obtain maximum properties.
PP 400
PP 400 offers superior mechanical properties in comparison to other options currently available on the market. Particularly, this material offers a 50% elongation of break, providing better impact resistance for use in dynamic environments.
Investment Casting
PS 200
Non-spherical polystyrene powder, a direct drop in replacement for Castform®, or can be blended with Castform®.